APR Braided Stainless Steel Brake Lines (Set of 2) - Front - BRK00049

APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!

This Part Fits:

Year	Make	Model	Submodel	Notes
2012	Volkswagen	Golf R
2013	Volkswagen	Golf R
2008	Volkswagen	R32

Specifications:

Brand	APR
Category	Brake
Emission Code	5
3390	Performance
Location	Front
part type	Brake Hydraulic Line Set
Product Type	Brakes (Lines)
Sub Category	Brake Hydraulics
Warning	California Proposition 65
Description_SHO	Brake Lines
Description_INV	FRONT BRAKE HOSE KIT
Description_ASC	Please Note: Always check your factory brake line connectors and compare them to ours. Some vehicles come with multiple caliper brands that may look similar, but may use different connectors that are not compatible.
Description_DES	APR Braided Stainless Steel Brake Lines (Set of 2) - Front
Description_EXT	Fits Volkswagen Golf R 12-13, R32 08.
Description_MKT	APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!
Description_FAB	Direct-fit plug-and-play upgrade
Description_FAB	Braided 304 stainless steel lines and connectors with a smooth-bore polytetrafluoroethylene (PTFE) / Teflon core
Description_FAB	Application specific lengths connectors which resist leaks better than adapters
Description_FAB	Cr3+ steel connectors featuring an attractive polished finish
Description_FAB	Less expansion than stock for a firmer pedal feel with less pedal travel
Description_FAB	Stronger than the factory lines to better resist failure
Description_FAB	Attractive polyvinyl chloride (PVC) outer jacket in smoked clear with red inserts and polished connectors
Description_FAB	High quality copper crush washers
Description_FAB	Each unit tested to 3,000 PSI, which is far beyond typical operating pressures
Description_FAB	Compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids
Description_FAB	DOT-compliant
Description_FAB	Independently lab certified as SAE “low-expansion” lines
Description_FAB	Average expansion of only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi
Description_FAB	Tested and meets FMVSS106 and SAE J1401 standards
Description_FAB	All necessary hardware and included
Description_FAB	Made in the USA